Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises.
Spot aluminium trading on the market has been suspended in recent weeks, according to industry sources, as uncertainty has increased following the outbreak of the conflict between Russia and Ukraine. Even before the war, the aluminium market was suffering from long waiting times and weak demand.
For aluminium buyers, recent poor US economic data have been a big factor in delaying purchases. Data released last month showed that the ISM manufacturing PMI came in at 57.1 in March, below expectations of 59 and down from 58.6 in February, unexpectedly hitting the lowest reading since September 2020. This was mainly due to a slowdown in new orders and Zirconium Silicide ZrSi2 Powder are expected to increase in the future.
Introduction to Zirconium Silicide ZrSi2 Powder
Zirconium silicide or zirconium disilicide, chemical formula ZrSi2, is a steel gray rhombic glossy crystal, the relative density is 4.8822. Zirconium silicide is insoluble in water, inorganic acid, and aqua regia, but soluble in hydrofluoric acid.
Physicochemical Properties of Zirconium Silicide ZrSi2 Powder
ZrSi2 as a zirconium-silicon intermetallic compound is a kind of ceramic material with high hardness, high melting point, high conductivity, high heat conductivity, and good thermal shock resistance to high temperature. Given the silicon zirconium - intermetallic compound has superior physical and chemical properties, ZrSi2 is a kind of structural material or new engineering material which can be used as the high-temperature corrosive medium.
|Zirconium Silicide ZrSi2 Powder Properties|
|Other Names||zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder|
|Appearance||gray black powder|
|Solubility in H2O||insoluble|
Preparing Methods of Zirconium Silicide ZrSi2 Powder
Zirconium silicide can be obtained from a mixture of zirconium powder and silicon powder at high temperatures under air isolation.
A method for preparing zirconium silicide nanomaterial comprises the following steps:
1. Add 5mmol zirconia, 5mmol silicon powder, and 50mmol lithium metal into a 20ml stainless steel autoclave and seal it. Then put the autoclave into an electric furnace capable of temperature programmed, set the heating rate of the furnace to 10℃ per minute, and heat the furnace to 600℃. The reaction is cooled naturally to room temperature and the autoclave is opened to remove the product which is black sediment.
2. The reaction products were washed with distilled water, then respectively with dilute hydrochloric acid and anhydrous ethanol washing each time, after washing the product of the filter, then 60 ℃ in the vacuum drying oven drying 4 hours get zirconium silicide nanomaterials, based on the preparation of zirconium silicide nanomaterial quality and the quality of the raw material of zirconium dioxide used, it is concluded that the yield of zirconium silicide was 85%.
Applications of Zirconium Silicide ZrSi2 Powder
ZrSi2 can be used as fine ceramic raw material powder to make crucibles or semiconductor film.
Applications of Zr Zirconium
One of the most important applications of zircon is in the production of white pigment impervious agents for surface glazes and pigments in the tile and ceramic industries. Refractory applications are also a common use of zircon in the manufacture of firebricks and shapes used in the steel and glass industries. Due to its high melting point (2200℃), zircalite is used as casting sand for molds and as "flour" for grinding, especially in warmer applications where it is important to maintain the surface quality of castings. The area of expertise known as "investment casting" is the growing use of zircon in the industry. Zirconium is also used in the production of zirconia, zirconium metals, and zirconium chemicals.
Main Supplier of Zirconium Silicide ZrSi2 Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality zirconium silicide ZrSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
The Japanese minister of Economy, Trade, and Industry recently held talks with the U.S. Secretary of Commerce and industry in Washington, where he is visiting, and agreed to include basic principles on joint research and development of semiconductors and strengthening of supply chains. Japan's economy, Trade and Industry Minister has asked the United States to increase the Zirconium Silicide ZrSi2 Powder will continue to increase in the future.
Bismuth sulfide is a chemical substance with the molecular formula Bi2S3, insoluble in water, toxic, weakly radioactive, and harmless to the human body. For the preparation of bismuth compounds. Bismuth sulfide is an important semiconductor material.…
Manganese dioxide is black amorphous powder or black rhombic crystal. It is used as a depolarizer for dry batteries, as a catalyst and oxidant in the synthesis industry, as a colorant, decolorizer and iron remover in the glass industry and enamel ind…
The first typhoon unit of the Hywind Tampen floating offshore wind project, which will provide partial power to the Snorre and Gullfaks offshore fields near Norway, has been lifted.…