News

  • 0
  • 0

What is Alumina Nanoparticle used for?

Due to the maintenance of the only turbine still in operation at the "Portovaya" compressor station, Gazprom stopped supplying gas through the Nord Stream 1 natural gas pipeline for three days from 4: 00 Moscow time on August 31.

Data provided by Nord Stream Natural Gas Pipeline Company, the operator of Nord Stream-1, show that the volume of gas transported by the pipeline has been reduced to zero. Gazprom said that the suspension of gas transmission will last until 4: 00 on September 3, and after the maintenance work is completed, the "Nord Stream-1" pipeline will be resumed without technical failure, when the daily gas delivery volume will be 33 million cubic meters.

The press secretary of the Russian president said on the 30th that European countries, the United States and Canada imposed sanctions on Russia, making it impossible for Russia to carry out routine maintenance and complete the registration and assembly of returned spare parts. apart from that, there are no other factors hindering Russia's supply of natural gas.

Because of the turbulent international situation, the supply and prices of many international bulk aluminum oxide are still very uncertain.

Lithium battery diaphragm coating material:
High purity nano alumina is applied to the positive and negative diaphragm of lithium battery as a ceramic coating, which plays the role of heat resistance, high temperature resistance and insulation, so as to prevent the power battery from short circuit due to high temperature and diaphragm melting.
 
Additives for cathode materials of lithium batteries:
High purity nano-alumina doped with lithium cobalt and lithium manganate can improve thermal stability, cycle performance and overcharge resistance, inhibit the formation of oxygen and the decomposition of LiPF6, avoid direct contact between LiCo02 and electrolyte, reduce the loss of electrochemical specific capacity, and improve the electrochemical specific capacity of LiCoO2.
 
Catalyst carrier:
High purity γ-type nano-alumina is a porous substance with an internal surface area of hundreds of square meters per gram, high activity and strong adsorption capacity. It is a commonly used adsorbent, catalyst and catalyst carrier in petroleum refining and petrochemical industry; it is a deacidizing agent for transformer oil and turbine oil in industry, and it is also used for chromatographic analysis; it is a neutral and strong desiccant in the laboratory, its drying ability is no less than that of phosphorus pentoxide, and it can be regenerated and reused after heating below 175 ℃ for 6-8 hours.
 
Powder coating anti-caking:
In summer, nano-alumina can effectively prevent powder coating caking. Nanometer aluminum trioxide used in powder coatings can improve the fluffiness of powder coatings and have good anti-caking effect. It has good storability for powder coatings used in high temperature and high humidity environment.
 
Coating, rubber, plastic wear-resistant and hardening agent:
Adding 5-20% nano-alumina, the coating can greatly improve the wear resistance and scratch resistance of the coating, which is 2-5 times higher than that of the traditional coating. After nano-alumina is added to the paint, a very fine, uniform and hard network structure can be formed on the paint surface, which protects the polymer paint layer from damage. the scratch resistance of nano-paint is 3 times higher than that of the original paint. it is widely used in automobile paint and so on. The addition of nano-aluminum trioxide can significantly improve the hardness of the coating, and about 20% can reach 6-7H. The transparency of the coating is not affected.
 
Plastic, rubber, adhesive, paint thermal conductivity:
Alumina single crystal thermal conductivity of 30, nanometer alumina, high thermal conductivity, large spherical filling. In order to improve the compatibility of resin matrix and fillers, improve the thermal conductivity of matrix materials and not reduce its mechanical properties, surface treatment agents such as coupling agents are commonly used to improve the thermal conductivity.
 
Ceramic:
Nano alumina has high purity, uniform particle size and good dispersion. When about 10% alumina is added to the sintered ceramics, the forming pressure increases, which can reduce the number of pores, thus increase the density of the ceramic blank, improve the density and mechanical properties of the sintered alumina ceramics, and reduce the sintering temperature more effectively.
 
Powder metallurgy:
Nano alumina for metallurgy has small particle size, large specific surface area and high activity, adding 1-3% nano-alumina to prevent matrix densification and grain size, enhance hardness, enhance electrical conductivity and mechanical properties, and improve melting point and high temperature resistance.
 
Polishing:
Alumina particles are uniform, have high sphericity, and are precision polishing powder, is a good material for metallographic polishing, but also suitable for stainless steel mirror polishing, titanium polishing, cast iron polishing, aluminum mirror polishing, stone mirror polishing, paint polishing, resin polishing, PCB circuit board polishing, glass polishing, optical glass, glasses lens polishing, resin lens polishing, sapphire polishing, LED polishing, germanium polishing. Zinc polishing, fast polishing, good brightness, no scratches.
 
Aluminum Oxide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest al2o3 price, you can send us your inquiry for a quote. (sales3@nanotrun.com
)
 
Aluminum Oxide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted al2o3 manufacturer and al2o3 supplier with over 12-year-experience. We ship our goods all over the world.
 
If you are looking for high-quality al2o3 powder, please feel free to contact us and send an inquiry. (sales3@nanotrun.com
)
 

Europe's immediate goal of reducing its dependence on Russian gas in response to the conflict with Ukraine presents a rare opportunity for the United States, the world's largest gas producer. America's LNG exporters have made a fortune this time. Investors are bullish on the future of natural gas, as evidenced by the recent record high share price of Energy company Chenier.  

But the outlook for more than a dozen new LNG projects is highly uncertain as construction costs rise, US gas prices soar and climate policymakers seek to move away from a long-term reliance on fossil fuels. Even the most advanced projects can take years to become operational.  

Currently, the total U.S. LNG aluminum oxide are expected to continue to rise in the future.

Inquery us

NEXT NEWS

Our Latest News

What are the types of superplasticizer?

Common superplasticizers include lignosulfonates and their derivatives, advanced polyols and polyol complexes, hydroxy carboxylic acids and their salts, polyvinyl ethers and their derivatives, etc.…

Effect of Nano Titanium Dioxide on Properties of Epoxy Resin coating

Titanium Dioxide nanoparticle is a pigment with strong coloring power and strong hiding power in white coatings, so it is very familiar in the coating industry.…

Waterborne defoamer for concrete

Polycarboxylate superplasticizer is often used in concrete, which can reduce the water consumption of concrete while maintaining the same fluidity, thus improving the strength and durability of concrete.…